A Simple Method of Producing Lunar Soil Simulants for Engineering Studies
This paper suggests that it is possible to obtain large quantities of simulated lunar regolith that can be used for feasibility studies of lunar base construction and excavation machinery...
Reservoir Estimates for the Sulpicius Gallus Region
Estimates presented here show that 1.1?109 metric tons of oxygen could of produced from one of the enriched areas that have been detected by spectrographic...
Terrestrial Analogs: Implications for Lunar Lava Tubes
Earlier work has demonstrated that lava tubes did form on the Moon. Comparison of terrestrial lava tubes to their lunar counterparts suggest that they are very similar despite the order...
Lunar Oxygen Production - A Maturing Technology
Research on oxygen production from lunar rock and soil has made significant progress in the past two years. An extensive series of experiments on natural and synthetic analogs has concentrated...
Lunar Oxygen Production in a Hydrogen Cold Plasma
This paper examines the concept of oxygen production from unbeneficiated lunar regolith using a non-equilibrium or 'cold' hydrogen plasma. An experimental investigation has indicated that...
Carbon Formation Theory for Space Oxygen Processes
Production of oxygen from the Martian atmosphere or lunar soil and the recovery of oxygen in manned space environments may include carbon formation from CO as a unit process. Thermodynamic...
Oxygen from Lunar Soil via Fluorination
This paper considers oxygen extraction from lunar soil via fluorination, for reasons of its high effectivity of oxygen release from most silicates. In addition to theoretical investigations,...
Analysis of Glass-Ceramic Production from Lunar Resources
Two simulated regoliths were used to investigate the effects of processing and composition on the properties of lunar-derived glass-ceramics. For the simulant with moderate iron concentration,...
Fiber Optic Chemical Sensors on Mars
A fiber optic chemical sensing instrument is described that will measure the reactivity of the martian soil and atmosphere. The self-contained instrument monitors reflectivity changes...
Natural Decay Resistance of Glued-Laminated Beams
The natural decay resistance of untreated Douglas-fir heartwood specimens sampled from glued-laminated beams was evaluated using a modified agar plate test modeled after the European Standard...
The Challenge of Housing the Largest Detector
The most innovative part of the structural-civil design of the Superconducting Super Collider (SSC) is that of the underground experimental halls located alongside the 86 kilometer collider...
High Strength Shotcrete and Concrete on the SSC Project
This paper addresses the technical aspects related to the use of high strength shotcrete and concrete on the Superconducting Super Collider (SSC) project. 7,000 psi shotcrete and 8,000...
Steel-Concrete Interaction by Means of Film Sensors
By adapting a recently-developed technique based on the piezoelectrical properties of relatively thick films made of Polyvinyldifluor organic composites and extensively used in robotics,...
Shear Design Guidelines for Polyester Concrete Using Recycled Plastic
Previous research on the shear behavior of steel-reinforced polymer concrete (PC) beams has been very limited and no efficient design procedures have been proposed. In all the previous...
Dynamic Response of Steel Fiber Reinforced Concrete
Extensive research has been done on the static properties of steel fiber reinforced concrete, but very little on the dynamic properties. A total of 20 beams was tested. The steel fiber...
Characterization of an ER Active Member
In the presence of strong electric fields (kV/mm), electrorheological (ER) materials change form viscous fluids to yielding materials. The class of ER materials used in this study have...
Synopsis of a Manual on Structural Fire Protection
Structural Fire Protection : Manual of Practice was published in 1992 by the American Society of Civil Engineers. The Manual has two major parts. Part I (Chapters 1 to 3) introduces the...
AWS versus AIJ Tubular K-Connection Design Rules
Among various existing design rules for circular tubular connections, the AWS rules are compared with the AIJ rules because of differences between the two. Subjects of discussion include...
The Behaviour and Design of Stressed-Arch (Strarch) Frames
The paper presents an overview of the stressed-arch structural system and the associated research program undertaken at the University of Sydney between 1988 and 1992. The objectives of...
Spherical Domes Subjected to Horizontal Earthquakes
The purpose of this paper is to get a powerful tool for response analysis of a spherical dome subjected to dynamic excitation based on mathematical analytic method, i.e., the Galerkin...
Return to search